Table of Contents
Advertisement
8) Remove the screw to detach the static eliminator [10] from the boss.
[Caution] Be careful not to drop the screw and the static eliminator inside of the fixing assembly, when
detaching it.
9) Release the harness from the wire saddle, edge saddle, and re-use band. Disconnect the 3 connectors
and remove the 3 screws to detach the fixing drive unit.
10)Hold the fixing upper unit (since it is engaged) to remove the 2 screws and the 2 fixing pins.
pg. 241
Hide quick links:
Advertisement
Table of Contents
