0115 Jam Code Due To The Torsion Spring Of The Reverse Flapper Coming Off - Canon imageRUNNER ADVANCE 8105 Series Manual

Symptom

0115 Jam Code due to the Torsion Spring of the Reverse Flapper coming off

[Inspected by Canon Inc. ]
Description
0115 Jam occurred at the entrance of the duplex path upon a double-sided copy.
- 0115: Duplex Left Sensor Delay Jam
Cause
The Reverse Flapper did not operate due to the Torsion Spring of the Reverse Flapper coming off. [A]
indicates the Torsion Spring being removed while [B] indicates a normal status.
[C] indicates the Reverse Flapper of when "the Torsion Spring" was removed while [D] indicates a normal
status.
Field Remedy
1) Remove the reverse guide from the fixing/feeder duplexing assembly.
2) Hook the Torsion Spring of the Reverse Flapper on the reverse guide properly to attach the reverse guide
again to the machine.
3) Make some duplex copies to make sure that no jam occurs.
pg. 196