Table of Contents
Advertisement
12. Connect the storage controller backup power cable.
13. Install the system air baffle on page 31.
14. Install the PCI air baffle on page 30.
15. Install the access panel on page 26.
16. Do one of the following:
•
Server in rack mode: Install the server into the rack on page 53.
•
Server in tower mode: Return the server to an upright position.
17. Connect all peripheral cables to the server.
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server on page 23.
The installation is complete.
Expansion board options
The server has five PCIe 3 expansion slots that support different form factor expansion boards.
For the location and description of the PCIe3 expansion slots, see System board components on page 12.
For more information on the PCIe slot specifications, see PCIe slot description on page 16.
Installing an expansion board
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
Hardware options installation
77
Advertisement
Table of Contents
