Table of Contents
Advertisement
Attach the FBWC cable to the cache module on the system board or to the controller card.
12.
Install all components removed from the server.
13.
Install the server into the chassis
14.
Power up the server (on page 14).
15.
Expansion board options
Installing an expansion board or FlexibleLOM
The server ships with PCIe riser boards and expansion slots. PCIe expansion boards and FlexibleLOMs
are supported with an optional riser board.
Power down the server (on page 14).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 14).
3.
Remove all shipping brackets.
4.
("Installing the server into the
chassis" on page 23).
Hardware options installation 48
Advertisement
Table of Contents
