Hot-Plug Drive Led Definitions - HPE ProLiant ML110 User Manual

Item LED
2 Online
\Activity

Hot-plug drive LED definitions

Item LED
1 Locate
2 Activity
ring
18 Component identification
Status
Flashing amber/blue
(1 flash per second)
Flashing amber
(1 flash per second)
Solid green
Flashing green
(4 flashes per second)
Flashing green
(1 flash per second)
Off
Status Definition
Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
Rotating green Drive activity
Off No drive activity
Definition
The drive has failed, or a predictive failure alert has been
received for this drive; it also has been identified by a
management application.
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
The drive is online and has no activity.
The drive is operating normally and has activity.
The drive is doing one of the following:
• Rebuilding
• Performing a RAID migration
• Performing a strip size migration
• Performing a capacity expansion
• Performing a logical drive extension
• Erasing
• Spare part activation
The drive is not configured by a RAID controller or a spare
drive.
Table Continued