3. Disconnect all peripheral cables from the server.
4. Do one of the following:
•
Server in rack mode: Remove the server from the rack on page 23.
•
Server in tower mode: Position the tower server for hardware configuration on page 25.
5. Remove the access panel on page 25.
6. Remove the PCI air baffle on page 29.
7. Remove the system air baffle.
Install the system air baffle
CAUTION: For proper cooling do not operate the server without the access panel, baffles, expansion
slot covers, or blanks installed.
Procedure
1. Install the system air baffle.
Operations
31