Drive Bay Numbering - HPE ProLiant ML110 User Manual

Item LED
3 Do not
remove
4 Drive
status

Drive bay numbering

Drive bay numbering depends on how the drive backplane is connected. In this server, the backplane can be
connected to the:
• Embedded Smart Array controller through the onboard SATA ports
• Smart Array type-p SR Gen10 controllers
When the backplane is connected to a storage controller, the drive bay numbering for each drive box starts at
1.
• LFF drive bay numbering: Smart Array controller
Status Definition
Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
Solid green The drive is a member of one or more logical drives.
The drive is doing one of the following:
Flashing green
• Rebuilding
• Performing a RAID migration
• Performing a strip size migration
• Performing a capacity expansion
• Performing a logical drive extension
• Erasing
• Spare part activation
Flashing amber/ The drive is a member of one or more logical drives and predicts the
green drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller or a spare drive.
Component identification 19