Table of Contents
Advertisement
Install the PCI air baffle
CAUTION: For proper cooling do not operate the server without the access panel, baffles, expansion
slot covers, or blanks installed.
Procedure
1. Install the PCI air baffle.
2. Install the front bezel on page 28.
3. Install the access panel on page 26.
4. Do one of the following:
•
Server in rack mode: Install the server into the rack on page 53.
•
Server in tower mode: Return the server to an upright position.
5. Connect all peripheral cables to the server.
6. Connect each power cord to the server.
7. Connect each power cord to the power source.
8. Power up the server on page 23.
Remove the system air baffle
Procedure
1. Power down the server on page 23.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
30
Operations
Advertisement
Table of Contents
