System Maintenance Switch Descriptions; Dimm Label Identification - HPE ProLiant ML110 User Manual

System maintenance switch descriptions

Position
1
S1
S2
S3
S4
1
S5
1, 2, 3
S6
S7
S8
S9
S10
S11
S12
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all
configuration settings to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some
configurations cannot be restored. For more information, see Secure Boot on page 120.

DIMM label identification

To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps
you to use the label to locate specific information about the DIMM.
14 Component identification
Default Function
Off
Off = iLO 5 security is enabled.
On = iLO 5 security is disabled.
Off Reserved
Off Reserved
Off Reserved
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off
Off = No function
On = Restore default manufacturing settings
Off Reserved
— Reserved
— Reserved
— Reserved
— Reserved
— Reserved