Event Log Setting; System Audit Log Settings - Inspur ON5263M5 User Manual

On the WEB GUI, go to the Logs → BMC System Audit Log → BMC System Log to display
the BMC system log. User can filter the audit logs by choosing the types (alarm, criticality,
fault, notification, warning, debug, emergency, and information), start time and end time,
and click the "Export Log" button and "Clear Log" button to perform log exporting and
deleting.

7.8.3 Event Log Setting

On the WEB GUI, go to the Logs → Event Log Setting to display system event log
information and configuration.

7.8.4 System Audit Log Settings

On the WEB GUI, go to the Logs → System and Audit Log Settings to configure SEL log
system records.
When Remote Log is enabled, the Server Address (IPv4 address or FQDN) and Server Port
(the default setting is 514) needs to be configured. Local files are stored in BMC DDR.
128
BMC Settings