Table of Contents
Advertisement
1. Safety Instructions
WARNING:
Please be advised to follow the instructions below for safety. Failure to do
so could result to potential dangers that may cause property loss, personal injury or
death.
1.
The power supplies in the system may produce high voltages and energy hazards
that may cause personal injury. For your safety, please do not attempt to remove
the cover of the system to remove or replace any component without assistance
provided by Inspur. Only service technicians trained by Inspur are authorized to
remove the cover of the host, and to remove and replace internal components.
2.
Please connect the equipment to the appropriate power supply. Use only power
supplies with the correct voltage and electrical specifications according to the label. To
protect your equipment from damages caused by a momentary spike or plunge of the
voltage, please use relevant voltage stabilizing equipment, or uninterruptible power
supplies.
3.
If you must use an extension cable, please use a three-core cable with properly
grounded plugs. Observe extension cable ratings. Ensure that the total rating of all
equipment plugged into the extension cable does not exceed 80 percent of the
ratings limit for the extension cable.
4.
Please be sure to use the power supply components that come with the server,
such as power lines, power socket (if provided with the server) etc. For your safety,
please do not replace power cables or plugs randomly.
5.
To prevent electric shock dangers caused by leakage in the system, please make
sure that the power cables of the system and peripheral equipment are correctly
connected to the earthed/grounded power socket. Please connect the three-core
power line plug to the three-core AC power socket that is well earthed and easy to
access. Be sure to use earthing /grounding pin of power lines and do not use the
patch plug or the earthing/grounding pin unplugged with cables. In the case that
the earthing/grounding conductors are not installed and it is uncertain whether
there are appropriate earthing/ grounding protections, please do not use or
attempt to operate the equipment. Contact and consult an electrician.
6.
Please do not push any objects into the openings of the system. Doing so may cause
fire or electric shock.
7.
Please place the system far away from the cooling plate and heat sources, and be
sure not to block the air vents.
Safety Instructions
1
Advertisement
Table of Contents
