Table of Contents
Advertisement
9. Battery Replacement
If the server does not show the date and time correctly, you may need to replace the
battery that provides power to the real-time clock.
WARNING:
The server contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery
pack is not properly handled. To reduce the risk of personal injury:
DO NOT recharge the battery.
•
DO NOT expose the battery to temperatures higher than 60°C (140°F).
•
DO NOT throw, immerse or dispose the battery into fire or water.
•
To replace the battery:
1. Remove the PCIe riser-card assembly (Refer to
2. Using fingers, gently push the battery away from the holder, and lift it out of the
holder.
WARNING:
DO NOT push the battery using excessive force. Failing to remove the
battery properly might damage the socket on the motherboard. Any damage to the
socket might require replacing the entire base with the motherboard.
3. Put the battery into the holder, and gently press the battery outward to secure the
battery into the holder
4. Dispose of the battery as required by local ordinances or regulations
NOTE:
After replacing the battery, you must reconfigure the server and reset the
system date and time.
Battery Replacement
PCIe Riser-Card Assembly
Replacement).
150
Advertisement
Table of Contents
