Table of Contents
Advertisement
To Create a RAID Volume under Legacy Mode:
1. Login to the BIOS Setup Menu, select "Advanced → CSM Configuration → Boot
Mode", and press +/- to change the item to [Legacy].
2. Press F10 to save & exit the BIOS Setup. The system will reboot automatically.
3. Press the <CTRL> + <I> keys to enter the SATA RAID configuration when "Press <CTRL-
I> to enter Configuration Utility..." message appears.
4. The SATA RAID configuration interface shows the information (HDD ID, HDD type, HDD
capacity, volume member or not) of HDDs connected to SATA controller, and the
existed RAID volumes information (including volume ID, name, RAID level, capacity,
status, bootable).
Parameter
Create RAID Volume
Delete RAID Volume
Reset Disks to Non-RAID
Mark Disk as Spare
Exit
BIOS Settings
Table 6-3
SATA RAID Configuration Interface
Description
Create an RAID volume.
Delete an existed RAID volume.
Reset the HDDs in RAID volume, and restore them to
non-RAID status.
Mark the HDDs as spare disks. The data will be cleared,
and those HDDs cannot be selected during RAID setting.
Exit SATA HostRAID configuration interface.
29
Advertisement
Table of Contents
