Fault Diagnosis; Bmc Self-Inspection Result; Bmc Recovery - Inspur ON5263M5 User Manual

7.9

Fault Diagnosis

Diagnostic tool provides the ability of check and verification for BMC or Host system to
check whether there is something out of function or something does not work correctly.

7.9.1 BMC Self-inspection Result

On the WEB GUI, go to the Fault Diagnosis →BMC Self-inspection Result to displays the
BMC self-inspection codes.
The following table shows the BMC self-inspection code.
Self-inspection code
0x55
0x56
0x57
0x58
0xff
0x80
0x40
0x20
0x10
0x08
0x04
0x02
0x01

7.9.2 BMC Recovery

Users can reset BMC through WEB or IPMI CMD in case of an abnormal situation occurs.
On the WEB GUI, go to the Fault Diagnosis →BMC Recovery to reset BMC or KVM.
To reset BMC, select the BMC Warm Reset (it uses WEB or IPMI CMD "ipmitool mc reset"
to reset BMC). To reset KVM, select the KVM Service Restart (KVM server will be reset).
BMC Settings
Description
SFT_CODE_OK
SFT_CODE_NOT_IMPLEMENTED
SFT_CODE_DEV_CORRUPTED
SFT_CODE_FATAL_ERROR
SFT_CODE_RESERVED
SEL_ERROR
SDR_ERROR
FRU_ERROR
IPMB_ERROR
SDRR_EMPTY
INTERNAL_USE
FW_BOOTBLOCK
FW_CORRUPTED
130