Table of Contents
Advertisement
Figure 3-2 Configuration Screen
4.
Press <F10>. On the popup confirmation dialog box, select Yes and press
<Enter> to save the settings and exit BIOS configuration screen. Then, start the
server.
The configuration screen is unavailable in the Legacy mode for Broadcom
94xx series or later controller cards. However, users can complete the
configuration in the UEFI mode, and then switch to the Legacy mode. This
section guides you on how to configure RAID in the UEFI mode.
The operating procedures described in this section are also applicable to
Inspur SAS3408iMR, SAS3508MR, and 9440/9460/9560 series.
The main difference between Inspur 3408iMR and 3508MR is that the former
has no cache and does not support the super-capacitor data protection
suite.
3.2
Log in to SAS3508MR Management Screen
Procedures:
1.
Restart the server to enter BIOS configuration screen. When the blue progress
bar appears on the LOGO screen as shown below, press <Delete> as prompted
to enter BIOS main screen.
2.
Switch to Advanced tab, select the SAS3508 controller from the existing RAID
controller card list, and press <Enter>.
16
Hide quick links:
Advertisement
Table of Contents
