Table of Contents
Advertisement
Switch the system power supply off and disconnect the cables, including all
1)
connections of the system. When disconnecting the cables, please hold the
connector of the cables and slowly pull the plugs out. Never pull on the cables.
The products need to completely cool down before dismounting the host cover
2)
or touching the internal components.
During the dismounting process, avoid making large movement ranges to
3)
prevent damage to the components or scratching arms.
Handle components
4)
components or connection points on the plug-in cards. When handling the
plug-in cards or components, firmly grab the edges of the plug-in cards and
components, and/or their metal fixed supports.
8.
During the process of rack installation and application, please pay attention to the
followings:
After the rack installation is finished, please ensure that the stabilizers have
1)
been fixed to the rack and supported to ground, and the weight of the rack is
firm on ground.
When pulling out the components from the rack, apply slight force to keep the
2)
rack balanced.
When pressing
3)
please be careful; as the sliding may hurt your fingers.
Do not overload the AC power supply branch circuits in the rack. The total
4)
load of the rack should not exceed 80% of the ratings of the branch circuits.
Ensure that components in the rack have good ventilation conditions.
5)
When
repairing components in the rack, never step on any other components.
6)
Safety Instructions
and plug-in cards with care. Please do not touch the
down the release latch and the rail of components is sliding,
4
Advertisement
Table of Contents
