Table of Contents
Advertisement
4.4.2 Fan Module Replacement
1. Remove the air baffle (Refer to
2. Disconnect the fan cable from the motherboard connector.
3. Lift up and remove the fan module.
4. Follow the preceding steps to install the fan module.
4.4.3 DIMM Replacement
WARNING:
Always wear an electrostatic-discharge strap or gloves when removing or
installing DIMM modules.
1. Remove the air baffle (Refer to
2. Locate the DIMM slot (see the
to replace.
3. Carefully open the retaining clips on both end of the DIMM slot.
NOTE:
Make sure that both retaining clips on the DIMM slot are in the fully-open
position.
Getting Started
Air Baffle
Replacement).
Air Baffle
Replacement).
DIMM slot
layout). Determine which DIMM you want
14
Advertisement
Table of Contents
