7.7
BMC Settings
BMC usually supports an LAN controller dedicated to BMC and a LAN controller shared for
both BMC and the system.
Maximum bandwidth: Dedicated NIC – 1000M, Shared NIC – 100M.
•
BMC network interface compatibly supports IPV4 and IPV6, supports DHCP or IP
•
address setting by manual.
MAC address is stored in the EEPROM.
•
Support VLAN.
•
By default, IPMI LAN channels are assigned as below:
•
Channel ID
0x01
0x08
BMC network interface supports enable/disable, enabled by default.
•
7.7.1 BMC Network Management
1. Network
On the WEB GUI, go to the BMC Settings → BMC Network →Network to configure the
LAN interface settings, IPv4 configuration and IPv6 configuration.
BMC Settings
Interface
Primary LAN (dedicated)
Secondary LAN (shared)
Support sessions
Yes
Yes
120