Table of Contents
Advertisement
7.2
Software Interfaces
The Baseboard Management Controller (BMC) offers remote management control for
server system status monitoring. It is an embedded system running independently of host
operation system which is able to perform a series of operations such as firmware
upgrade, management control, and device status checking even when the host is shut
down.
The BMC has the following features:
Support IPMI 2.0, IPMI interfaces including KCS, Lan and IPMB
•
Management Protocol: IPMI2.0, HTTPS, SNMP, Smash CLI
•
Web GUI
•
Redfish
•
Management Network Interface, Dedicated/NCSI
•
Console Redirection (KVM) and Virtual Media
•
Serial Over Lan (SOL)
•
Diagnostic Log, System Event Log (SEL), Inspur Diagnostic Logs and One-key collection
•
log
BMC hardware watchdog timer, if the BMC does not respond within four minutes,
•
the fan will reach full speed.
Support Intel® Intelligent Power Node Manager 4.0
•
Event Alert: SNMP Trap (v1/v2c/v3), Email Alert and Syslog
•
Dual BMC firmware image
•
Firmware upgrade, BMC/BIOS/CPLD
•
Device State Monitor and Diagnostic
•
7.2.1 IPMI 2.0
7.2.1.1 Channel ID Assignment for Each Interface
Table 7-1
Channel ID
0x00
0x06
0x0A
0x01
0x08
0x0F
BMC Settings
Channel ID Assignment for Each Interface
Interface
Primary IPMB
Secondary IPMB
Third IPMB
Primary LAN
Secondary LAN
KCS / SMS
Purpose
Unused
Access ME
Unused
Dedicated management
interface
Shared management
interface
In-band IPMI
communication
Support Sessions
No
No
No
Yes
Yes
No
85
Advertisement
Table of Contents
