Table of Contents
Advertisement
5. Execute the command to update boht BIOS and ME: ./afulnx_64 BIOS.bin /b /p /n /x /k
/l /me.
NOTE:
For Linux system, it needs to run the afulnx_64 tool as root.
•
After the update is complete, power off the server, confirm that there is
•
no residual electricity on the motherboard, and then power it on
NOTE:
Parameter Instruction:
/B Program Boot Block
•
/P Program main bios image
•
/N Program NVRAM
•
/X Do not check ROM ID
•
/K Program all non-critical blocks
•
/L Program all ROM Holes
•
/ME Program ME Entire Firmware Block
•
BIOS Settings
83
Advertisement
Table of Contents
