Network Stack Configuration - Inspur ON5263M5 User Manual

6.2.2.8 Network Stack Configuration

Set the UEFI Network stack configuration.
Table 6-15
Parameter
Network Stack
Ipv4 PXE Support
Ipv4 HTTP Support
Ipv6 PXE Support
Ipv6 HTTP Support
IPSEC Certificate
PXE boot wait time
Media detect Count
BIOS Settings
Advanced > Network Stack Configuration
Description
Enable/Disable the UEFI network stack.
Options: Enabled/Disabled
NOTE: When set to [Enabled], the
following items are configurable.
Enable/Disable the Ipv4 PXE feature.
Options: Enabled/Disabled
Enable/Disable the Ipv4 HTTP feature.
Options: Enabled/Disabled
Enable/Disable the Ipv6 PXE feature.
Options: Enabled/Disabled
Enable/Disable the Ipv6 HTTP feature.
Options: Enabled/Disabled
Enable/Disable the IPSEC certificate feature.
Options: Enabled/Disabled
Set the wait time to cancel PXE boot after
pressing ESC key, the setting range is 0-5.
Set the detected device count, the setting
range is 1-50.
Default Setting /
Format
Enabled
Enabled
Disabled
Disabled
Disabled
Enabled
0
1
47