Inspur ON5263M5 User Manual page 147

Step 1
On the WEB GUI, go to the Administration →BMC Firmware Update to change the image
to be updated. The default setting is Both Images, meaning both images will be updated.
Check the Preserve all configuration box to preserve the configuration, click on the Enter
Preserve Configuration button to select items needed to be preserved, and click on the
Enter Firmware Update Mode button to start the update process.
Step 2
Click on the Browse button to select an image file, and then click on the Start firmware
update button to upload the file. BMC will enter into the flash mode, IPMI service will
stop, and then BMC will verify the image (verify size should be 32M). Verify the image
integrity to ensure that this is a BMC image. If the verification fails, BMC will stop the flash
process and restart.
138
BMC Settings