4.
Remove the two screws securing the PCIe card in place.
5.
Remove the PCIe card from the PCIe riser module.
6.
Follow the preceding steps to install the PCIe riser-card assembly.
NOTE:
Make sure that the PCIe riser-card assembly is firmly connected to the
motherboard connector before tightening the screw to secure the PCIe riser-card
assembly in place.
4.4.5 M.2 SSD Replacement
1. Remove the PCIe riser-card assembly (Refer to
2. Using your fingers, gently pull up the snap clip.
Getting Started
PCIe Riser-Card Assembly
Replacement).
17