Table of Contents
Advertisement
In Canada, you must install the equipment in accordance with Canadian Standards
Association, CSA C22.1, and Canadian Electrical Code. In all other countries, you must
install the equipment in accordance with any regional or national electrical wiring codes,
such as the International Electrotechnical Commission (IEC) Code 364, parts 1 through 7.
Furthermore, you must be sure that all power distribution devices used in the installation,
such as branch wiring and receptacles, are listed or certified grounding-type devices.
Because of the high ground-leakage currents associated with multiple servers connected
to the same power source, Inspur recommends the use of a PDU that is either
permanently wired to the building's branch circuit or includes a non-detachable cord that
is wired to an industrial-style plug. NEMA locking-style plugs or those complying with IEC
60309 are considered suitable for this purpose. Using common power outlet strips for the
server is not recommended.
5.2
Downloading the Drivers
For the information on downloading the latest drivers, firmware, documentations, go to
Inspur website: https://en.inspur.com/eportal/ui?pageId=2490734.
21
Setup
Advertisement
Table of Contents
