Table of Contents
Advertisement
To create a RAID volume under UEFI Mode:
NOTE:
This action is available when SATA Controller is set to [Enabled] and SATA
Mode Options is set to [RAID].
1. Login to the BIOS Setup Menu.
2. Select "Chipset → PCH SATA Configuration/PCH sSATA Configuration → SATA Mode
Options" and press +/- to change the item to [RAID].
3. Press F10 to save & exit the BIOS Setup. The system will reboot automatically.
4. Login to the BIOS Setup Menu, select "Advanced → CSM Configuration → Boot
Mode", and press +/- to change the item to [UEFI].
5. When the Boot Mode is set to [UEFI], the Intel(R) VROC SATA Controller menu appears
on the Advanced menu. Press Enter to show the HDD information.
6. Press Enter to create a RAID volume.
BIOS Settings
26
Advertisement
Table of Contents
