Pci Subsystem Settings - Inspur ON5263M5 User Manual

Parameter
Flow Control
VT-UTF8 Combo Key
Support
Recorder Mode
Redirection 100×31
Putty KeyPad

6.2.2.4 PCI Subsystem Settings

Set the PCI subsystem information.
BIOS Settings
Description
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a 'stop' signal can
be sent to stop the data flow. Once the
buffers are empty, a 'start' signal can be sent
to re-start the flow. Hardware flow control
uses two wires to send start/stop signals
Options: None and Hardware RTS/CTS
Enable/Disable the VT-UTF8 Combo Key
Support.
Options: Enabled/Disabled
When this mode enabled, only texts will be
send. This is to capture Terminal data.
Options: Enabled/Disabled
Enable/Disable extended terminal resolution.
Options: Enabled/Disabled
Selects FunctionKey and KeyPad on Putty.
Options:
VT100/LINUX/XTERMR6/SCO/ESCN/VT400
Default Setting /
Format
None
Enabled
Disabled
Disabled
VT100
43