System Event Log - Inspur ON5263M5 User Manual

7.8.1 System Event Log

BMC provides the system event log function, to record the IPMI sensors based on the
event history. System event log outputs the following items and user can get the sensor
event information by WEB or IPMI CMD.
Support up to 3639 items.
•
Support linear mode. When SEL is full, new log will be discarded.
•
Support cycle mode, default mode. When SEL is full, oldest log will be discarded.
•
When SEL is almost full (75%), then almost full log will be recorded in SEL.
•
When SEL is full in linear mode, Full log will be recorded in SEL.
•
When SEL is clear, Clear log will be recorded in SEL.
•
Support exporting SEL by WEB or IPMI CMD.
•
Support informing event to remote client by SNMP Trap, Email Alert, Syslog.
•
On the WEB GUI, go to the Logs → System Event Log to display all sensors. User can
configure the event types, sensor types, event severity, and event occurrence time period
parameters to filter system event logs. At the same time, the system provides the user
with a time zone configuration option for the logs. System event log can be displayed in
the desired time zone according to the time zone selected by users.
Item
Event ID
Time Stamp
Severity
Sensor Name
Sensor Type
Description
BMC Settings
Description
Event ID
Event generate time
Event error level, include Error, Warning, Information
Sensor Name, locate the device
Sensor Type defined in IPMI2.0
Event details
126