Smtp Settings; Alert Management - Inspur ON5263M5 User Manual

7.7.4 SMTP Settings

On the WEB GUI, go to the BMC Settings → SMPT Settings to configure the SMTP settings.

7.7.5 Alert Management

BMC supports the SNMP Trap configuration. User can open trap receiver and set trap
destination IP in BMC Web GUI. When BMC detects an event, BMC will send the
event to the trap receiver.
BMC supports SNMP v1, v2, v3 traps (Default Trap v1).
•
A Modular Information Block (MIB) file associated with the traps should be provided
•
with the BMC firmware to help SNMP Trap receiver to interpret the trap.
BMC Settings
123