to the Station IP address. This setting only changes the IP address in BIOS Setup
interface, and does not notify BMC to change the IP settings.
5. Repeat step 3 and step 4 (on how to change the setting for Station IP address) to
change the settings for Subnet mask, Station MAC address and Router IP address.
To configure the BMC Dynamic network parameters:
1. Set the Get BMC Sharelink Parameters or Get BMC Dedicated Parameters to [Manual].
2. Set the Configuration Address Source to [DynamiBmcDhcp]. The "Set Dynamic BMC IP
Address Source Success! ......." message appears. Press Enter to continue.
BIOS Settings
35