Inspur ON5263M5 User Manual page 43

To configure the BMC Static network parameters:
1. Set the Get BMC Sharelink Parameters or Get BMC Dedicated Parameters to [Manual].
2. Set the Configuration Address Source to [Static]. The "Set Static BMC IP Address
Source Success!!" message appears. Press Enter to continue.
3. At the Station IP address prompt, type the station IP address, and then press Enter.
4. If the setting was successful, the "Set Static BMC Station IP OK!!!" appears. If the
setting was failed, the "Set Static BMC Station IP Fail!!!" appears. If the IP address was
the same, the "Static BMC Station IP Not Change!!!" appears. If the IP address was
invalid, the "Invalid Station IP Entered!!!" appears, and the system will assign 0.0.0.0
BIOS Settings
34