Option Connection Diagram; Communication Cable Wiring - YASKAWA SI-N3/V Technical Manual

A - Drive front cover
9.
Set drive parameters in
◆

Option Connection Diagram

*1 Connect the included ground wire for installations on 1000-series, GA500, and FP605 drives. The ground wire is not necessary for
installations on GA700 or GA800 drives.
◆

Communication Cable Wiring

Route the option wiring as specified by these procedures.
Note:
Use only a DeviceNet dedicated communication cable. Refer to
about selecting trunk line and drop line lengths. Refer to the ODVA website (www.odva.org) for more information on network cabling.
YASKAWA SIEP C730600 84G DeviceNet Technical Manual
Figure 5.21 Replace the Front Cover and Keypad
Related Drive Parameters on page 27
Figure 5.22 Option Connection Diagram
Trunk Line and Drop Line Length on page 95
B - Keypad
for correct option performance.
5 Installation Procedure
for more information
25