Equalizer; Aux / Groups And Internal Efx-1-4 (Levels) - EAW UMX.96 Owner's Manual

Touchscreen Interface
EAW UMX.96 Owner's Manual
Touch the COMP/LIM IN button to turn on or off the Compressor, and touch the Hard Knee/Soft Knee switch
to toggle between the two modes.
Touching anywhere else in this area takes you to the Dynamics tab where you can make further adjustments
to the dynamics settings. For more information, see the section on the Dynamics Tab, Section 12.2.7.

12.2.4.24 EQUALIZER

This block provides an overview of the operation of the Equalizer for the channel. Touch the EQ IN button
to turn on or off the EQ. Touch the HPF IN button to turn on or off the high-pass filter, and touch the LPF IN
button to turn on or off the low-pass filter.
Touching anywhere else in this area takes you to the EQ tab where you can make further adjustments to the
equalizer settings. For more information, see the section for the Equalizer Tab, Section 12.2.6.

12.2.4.25 AUX / GROUPS and Internal EFX-1-4 (levels)

At the right of the Channel Overview screen, find the
Aux/Groups overview. It shows the Aux/Group assign-
ments, levels, and pre/post settings for the selected
channel.
Beneath it is the Internal EFX overview. It shows what
effects are currently assigned to the four internal EFX
loops.
Touching this area of the overview screen takes you to
the Aux/Groups tab where you can make adjustments
to the Aux sends and Effects sends for the selected
channel. Additional information can be found under
the section for the Aux/Groups Tab, Section 12.2.8.
12-10