EAW UMX.96 Owner's Manual
12.2.15
Stereo Channel Inserts Tab
NYI
This tab allows control of the pre-DSP and post-DSP digital inserts. A drop-down list allows selection of the
insert from the available choices. The list is separated into software DSP inserts and hardware inserts. The IN
buttons allow enabling the inserts and for software DSP inserts, the Edit buttons allow quick access to the
DSP processor control screen. Hardware inserts are configured in the Routing > Insert Routing screen. See
Section 11.9 for details.
12.2.15.1 Stereo Channel Inserts Edit Menu
The stereo channel's Inserts tab Edit menu has the following commands:
NYI
• Reset Inserts — Resets all inserts to their default setting.
• Copy — Copies insert assignments to the clipboard.
• Paste — Pastes insert assignments from the clipboard.
12-24
Touchscreen Interface