Presets And Settings Overview - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
12.13

Presets and Settings Overview

Presets allow access to predetermined parameter settings for a DSP block or other logical group of param-
NYI
eters. All settings for a particular DSP functions such as EQ, Compression, or Effects, can be saved as a Preset.
These settings can then be loaded as needed. Presets are saved independently of Show or Mixer Configura-
tion in a dedicated preset folder for each DSP function on the internal computer's hard drive. A preset can be
created while one show is active, and loaded again into a different show.
The UMX.96 comes with a library of factory presets.
NYI
For every screen with a preset (see Section 12.13.1), a load preset and save preset option is available from
that screen's Edit Menu.
The Save Preset dialog shows a single file browser similar to that described in Section 12.12.1.
• Like the Save tab, the top of the list displays a drop down menu for choosing the drive used to save the
data (Local, USB1, USB2, etc.). The list displays folders and files with special icons (folders, shows, configu-
rations, presets).
• Only one item in the list can be selected at a time and it is outlined in yellow.
• Navigate through the file structure using the Up Arrow and the OPEN buttons (blue).
• Create new folders with the New Folder button (blue).
Below the browser are three buttons, Save (red), Save As (red) and Cancel (blue).
• The Save button is lit if an existing preset of the same type is selected in the browser.
• Pressing the Save button replaces the existing preset with current state of the screen.
• Save As allows the user to enter a new name with the onscreen keyboard and save a new preset.
• Cancel cancels saving the preset.
The Load dialog is similar to the save dialog.
• The top of the list displays a drop down menu for choosing the drive used to save the data (Local, USB1,
USB2, etc.). The list displays folders and files with special icons (folders, shows, configurations, presets).
• Only one item in the list can be selected at a time and it is outlined in yellow.
• Navigate through the file structure using the Up Arrow and the OPEN buttons (blue).
Below the browser are two buttons, Load and Cancel.
• Load is lit if a preset of the current type is selected.
• Cancel closes the dialog without loading the preset.
12-103
Touchscreen Interface