Filtering - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
12.14.2

Filtering

NYI
The second tab in the Snapshot window is snapshot FILTERING. Each snapshot can be filtered so that only
the selected parameters and channels are recalled with that snapshot.
• Enabling filtering for a parameter means that it will be changed by the recall of the snapshot.
• By default, all parameters and channels are selected so all parameters are recalled.
• The filtering tab displays a list of snapshots at the top left of the screen with one selected. This list is inde-
pendent of the snapshot list on the overview screen; any upcoming snapshot(s) can be filtered during the
show while still keeping the show on track.
• Filtering does not affect the information actually stored by the snapshot because it is performed in real
time on recall. Snapshot data is recalled for all filtered parameters on all filtered channels.
The bottom of the screen displays a graphic representation of 24 channel faders.
The faders display the fader value stored in the snapshot as a red highlight and the current state of the con-
sole faders as the real fader knob. The faders can not be dragged up or down, instead they can be touched
to deselect them and to toggle their filtered state. Enabled channels will be affected by snapshot recall.
• The background of each fader changes color to show whether it is filtered or not. Deselected faders ap-
pear grayed out.
• Small icons above the faders show the mute status stored in the snapshot.
• ALL and NONE buttons are available for quick selection of all or none of the channels for snapshot filtering.
Similarly, the type of parameters recalled for enabled channels can be filtered as well. Use the set of buttons
at the top right.
12-107
Touchscreen Interface