Flanger; Effects Edit Menu - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual

12.2.17.7 Flanger

The flange effect is very similar to the chorus effect, and has the same controls as previously described for
the chorus effect with the addition of a Regeneration control. A flanger has a shorter Pre Delay time, typi-
cally from 1 ms to 10 ms. The shorter delay time produces a better comb-filtering effect, which creates the
characteristic "whooshing" sound often used to describe the flange sound.
Regeneration: This controls the amount of the flanged signal that is routed back to the input of the flanger.
This changes the sound of the flange effect by adding even more comb filtering to the signal.
FUNCTION PARAMETER
Pre Delay
Mode
Flange
Depth
LFO Speed
LFO Wave
Regeneration

12.2.17.8 Effects Edit Menu

The internal FX processors have the following Edit menu commands:
NYI
• Save Effects Preset As — Saves the effects channel settings as a preset using a user-defined name.
• Load Effects Preset — Loads a previously saved effects channel preset.
• Reset Effects — Resets the effects channel to its default settings.
• Reset EQ — Resets the 3-band EQ to its default settings.
• Copy — Copies the channel settings to the clipboard.
• Paste — Pastes the effect and EQ settings from the clipboard.
VALUE RANGE (INCREMENT) DEFAULT VALUE
0-100 ms (1 ms steps)
1a, 1b, 2a, 2b, 3a, 3b, 4a, 4b
0-10 ms (0.1 ms steps)
0.05-5 Hz (scaled steps)
Sine, Triangle, Random
0 to 100%
12-31
Touchscreen Interface
0 ms
1
3 ms
1 Hz
Sine
0