Table of Contents
Advertisement
EAW UMX.96 Owner's Manual
12.2.19
Internal FX Aux/Groups Tab
This tab displays the Aux/Groups screen for the effects channel. Touching the Aux/Groups overview area on
the Overview screen also brings you here.
Everything here is identical to the Aux/Groups screen for the analog input channels, with one exception: you
can't send the effect back to its own send as illustrated in the figure below. This is done to prevent feedback
loops. For further information, refer to Section 12.2.8.
12.2.19.1 Internal FX Aux/Groups Edit Menu
The internal FX channel Edit menu has the following commands:
NYI
• Save Aux/Groups Preset As — Saves the channel's Aux/Groups settings as a preset using a user-defined
name.
• Load Aux/Groups Preset — Loads a previously saved Aux/Groups preset.
• Reset Aux/Groups — Resets Aux/Groups to its default settings.
• Reset Aux/Groups — Resets Aux/Groups to its default settings.
• Copy — Copies the channel settings to the clipboard.
• Paste — Pastes the Aux/Group settings from the clipboard.
12-33
Touchscreen Interface
Advertisement
Table of Contents
