EAW UMX.96 Owner's Manual page 155

Touchscreen Interface
EAW UMX.96 Owner's Manual
• Monitor Mode — A 3-position toggle switch allows you to configure the monitor outputs to match your
listening environment. Choose from the following options:
2 Speaker Mode — In this mode, the center/mono channel is panned equally between the left and right
speakers. The Monitor C connector has no output.
2 Speaker (LR)
Monitor Output Mode
L+C/M R+C/M
Left Powered Right Powered
Monitor Monitor
3 Speaker Mode — In this mode, all outputs are fed only by their individual LRC bus.
3 Speaker (LR C/M)
Monitor Output Mode
L R C/M
Left Powered Right Powered Center/Mono Powered
Monitor Monitor Monitor
In Ears and Wedge — In this mode, the left and right monitor outputs act as if they're in 2-speaker mode,
but the Monitor C connector gets signals that solo as center/mono sources. Connect your (personal) in-
ear system to Monitor L and Monitor R. Connect your wedge to Monitor C. Any linked stereo buses solo
into the in-ear system, and any mono buses solo into the wedge.
In Ear (LR) Wedge (C/M)
Monitor Output Mode
L+C/M L+R+C/M
R+C/M
In-Ear Monitor
Powered Monitor
System
12-75