Presets And Settings Saved - EAW UMX.96 Owner's Manual

EAW UMX.96 Owner's Manual
12.13.1

Presets and Settings Saved

DSP Functions with Presets
(1)
Mic Amps
4-Band EQ (Channel EQ)
RTA 31 (Master EQ)
Compressor
Gate
Matrix Inputs
System Processor (whole)
System Processor (Input Leg)
System Processor (Output Leg
— includes X-Over)
Reverb
Gated Reverb
Mono Delay
Stereo Delay
Ping Pong Delay
Chorus
Flange
User Bank
Master Bank
Input Routing
Output Routing
Insert Routing
User Keys
Naming
1 These screens all have a save preset item in their edit menu.
2 The mixer configurations are all settings that are not saved to show. Exceptions are saved only to the console's current
state (next column).
3 Some settings are not saved to shows or console configurations. These are only saved to the console's current state
and are recalled during a power cycle.
Settings Saved to Shows/
Snapshots
Input Channel Settings
Output Channel Settings
Aux/Group Channel Settings
Matrix Channel Settings
Setup > Naming (except for
System Processor Ins and
Outs and Monitor Outs)
Routing (except for System
Processor)
Effects
Utility >
• User Banks
• Mute Groups
Snapshot Filtering
12-104
Settings Saved to Mixer
Configurations (2)
Utility >
• Talkback
• Monitors
• Tone Generator
• SPL Meter
• User Keys
• Meter View (pre/post
selection)
Setup >
• Operation
• General (except Tem-
perature)
• Digital
• MIDI
• Naming (System Pro-
cessor Ins and Outs only)
Smaart > Setup
EQ Type (Trad/Full Range)
System Processor >
• DSP Settings
• Routing
• Bypass
Touchscreen Interface
Settings Saved to Current
Console State (3)
Snap Safe
Mute Safe
Master Bank Layout
Temperature
Custom Channel Assign Mode
Channel Assign (V-Pot
Selection)
Channel Follow Mode
Selected Channel
Snapshot Update Parameters
Smaart In, and View for EQ
and RTA 31
Selected Snapshot Number
Selected Snapshot In Filter
List and Preview and Up-
date List
Setup>Admin
Utility Banks
Master Meter View Selection
Preview (resets on power
cycle)
Solo and Key Listen (resets
on power cycle)
Screen View (resets on
power cycle to Channel >
Overview)