Establishing A Wireless Connection - Javad TRIUMPH-1 Operator's Manual

Integrated gnss receiver

Hide thumbs Also See for TRIUMPH-1:

Table of Contents

Description and Operation

Connecting the Receiver and a Computer

Establishing a Wireless Connection

5.3. Establishing a Wireless Connection

The TRIUMPH-1 receiver contains Bluetooth

synchronization between the receiver and any other external device that supports Bluetooth

technology. TRIUMPH-1 and external device connection procedure varies slightly depending on the type

of external device used.

Note:

Refer to your Bluetooth

information.

In general, the connection procedure with PC is as follows:

1. Turn on a Bluetooth

the receiver's Bluetooth

2. Instruct the external device (Master) to search for the receiver (Slave).

3. Once the Master device detects the receiver, use the procedure described in the external device's

documentation to connect it with the receiver.

4. Start NetView, select SER as type of connection mode, and specify the port the receiver is con-

nected to.

Note:

By default the TRIUMPH-1 Bluetooth module's PIN is 1234.

-enabled external device documentation for more detailed connection

-enabled PC and your receiver. The default external device mode is Master;

module mode is Slave.

Figure 15. NetView. Connection via serial port

wireless technology that allows file transfer and

wireless

www.javad.com

Table of Contents

Do you have a question about the TRIUMPH-1 and is the answer not in the manual?