Deleting Files; Managing Receiver Options - Javad TRIUMPH-1 Operator's Manual

Description and Operation
Receiver and File Maintenance

Deleting Files

2. Click File on the left panel. On the right panel appears the list of files, saved in receiver's memory.
Select the file(s) to download (Figure 35).
Note:
To select multiple files, hold down the shift key and click on nonsequential files to select several files at
once; or hold down the Ctrl key and click on individual files.
3. Click the Download button. During the download, status indicators display each file.
9.2. Deleting Files
Use the following steps to delete files from your receiver.
1. Connect your receiver and computer. See "Connecting the Receiver and a Computer" on page 28
for this procedure. Start NetView. Establish connection between NetView and receiver.
2. Click File on the left panel. On the right panel appears the list of files, saved in receiver's memory.
Select the file(s) to delete
Note:
To select multiple files, hold down the shift key and click on nonsequential files to select several files at
once; or hold down the Ctrl key and click on individual files.
3. Click Delete. Click Yes at the delete files confirmation dialog box. NetView deletes the selected
files.

9.3. Managing Receiver Options

Checking an OAF
Note:
For a complete list of options and their details, visit the JAVAD GNSS website.
You can check the status of your receiver's options, and load any new OAFs via NetView.
1. Connect your receiver and computer. See "Connecting the Receiver and a Computer" on page 28
for this procedure. Start NetView. Establish connection between NetView and receiver.
2. Click on the receiver name on the left panel. On the right open Options tab.
56
Figure 35. Download Files
www.javad.com