Javad TRIUMPH-1 Operator's Manual page 32

Description and Operation
Configuration
Configuring the Internal UHF Modem / GSM Module
• Programming the radio modem's settings.
• Loading the new modem firmware.
Note:
See the ModemVU Software Manual available on the JAVAD GNSS website for details on configuring the
receiver with an internal UHF modem and/or GSM radio modem, or an external UHF modem.
For JAVAD GNSS receiver, the integrated UHF radio modem provides TX/RX communications between
a Base and Rover. To configure an UHF modem/GSM module, have the following ready:
1. Connect the computer and TRIUMPH-1. Turn on the receiver.
2. Start ModemVU.
3. Select the radio type your receiver has (Figure 16), and click OK:
• Triumph-1 Internal Radio - for the internal UHF and/or GSM modem;
• HPT 435BT - for the external HPT435BT UHF modem.
32
Figure 16. Options window
www.javad.com