Working With Individual Setups (Test Protocols); Selecting A Test Protocol - Interacoustics Affinity 2.0 Additional Information

2.8 Working with individual setups (test protocols)

The REM440 module is pre-programmed with standard protocols ready f or use which can be selected f rom
the f ront screen. However, you may wish to create an individual test protocol accommodating for personal
pref erences and test methods.
This section describes both how to select a pre-programmed protocol and how to create an individual test
protocol.
2.8.1

Selecting a test protocol

1) Open the REM440 module by selecting the REM tab in the Af f inity
2) In the List of Protocols all standard and individual test protocols are listed.
3) When selecting a protocol, the tests of the specif ic protocol will then be listed in the lower lef t corner
ready f or use.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
2.0 /Equinox 2.0 Suite.
Page 213