4 Printing and making reports
4.1 The print wizard
In the Print Wizard you have the option to create customized print templates which can be linked to individual
protocols f or quick printing. The Print Wizard can be accessed in two ways.
a. If you want to make a template f or general use, or select an existing one f or printing: Go to Menu/
File/Print Layout... in any of the Af f inity
b. If you want to make a template or select an existing one to link to a specif ic protocol: Go to Module
tab (AUD, REM, or HIT) relating to the specif ic protocol and select Menu/Setup/AC440 setup,
Menu/Setup/REM440 setup, or Menu/Setup HIT440 setup. Select the specif ic protocol from the
drop-down menu and select Print Wizard at the bottom of the window.
Now the Print Wizard window opens and shows the f ollowing inf ormation and f unctionalities:
1
1
1. Underneath Categories you can select
Templates to show all available templates
•
•
Factory defaults to show only standard templates
User defined to show only custom templates
•
Hidden to show hidden templates
•
My favorites to show only templates marked as a f avorite
•
2. Available templates f rom the selected category are shown in the Templates viewing area.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
2
Suite tabs (AUD, REM or HIT)
2
5
12a
12b
6
3
4
1
Page 354