3.10 The HIT440 menu items
The HIT440 Menu gives you access to File, Edit, View, Mode, Setup, and Help.
1)
Menu/Print
Menu/Print/Print will prompt the system to print using the selected print template (see section 4).
Menu/Print/Print Preview prompts a print preview of the current test protocol using the print
template which is linked to the current protocol. Note that you are prompted to select a template if
the protocol did not include a template (see how to create a print layout in section 0).
Menu//Print/Print Layout opens the print wizard window f rom where you can select or create a
template to print the current test protocol (see section f or details regarding the Print Wizard).
2)
Menu/Edit/Export
Menu/Edit/Export will prompt the system to export the session as an XML f ormatted f ile.
3)
Menu/View
Menu/View/Save window position will save the current position of the HIT440 window on the PC
screen so that it opens at this exact position every time. This is f or example practical if you are
usually running and viewing other sof tware modules (such as f itting software) at the same time.
Using this f unction f or moving and/or resizing of the HIT440 will only be necessary once.
4)
Menu/Mode
Menu/Mode/Single measurement will set the system to present the selected stimulus as a single
sweep.
Menu/Mode/Continuous measurement will set the system to present the selected stimulus
continuously.
Menu/Mode/Single frequency mode will set the system to perf orm a test at a single f requency.
Menu/Mode/Endless loop will set the system to perf orm the tests of the test protocol continuously
until tolerance limits specif ied in the setup are overstepped.
Menu/Setup
Menu/Setup/HIT440 setup opens the HIT440 where you can setup customised test protocols
Menu/Setup/General setup opens the General setup where settings valid f or all tests can be
selected
Menu/Setup/Temporary setup opens the Temporary setup where temporary settings f or the
specif ic session can be selected
Menu/Setup/Password protection allows you create or change a password and thereby protect
your HIT440 settings. Press Change password and type in the pref erred password. Then press
OK. Note that your password needs to be activated in Protected settings under
Menu/setup/General setup (see section 0).
Menu Setup/Show/hide protocols prompts a screen allowing you to tick test protocols which are
to be shown in the List of Protocols and untick the test protocols which are to be hidden.
Menu/Setup/Language opens the language selection. The system must be restarted f or a new
language selection to take ef f ect.
Menu/Setup/General Suite Settings launches a screen where the user can choose which module
should start up, the examiner options and the choice to change the language. Please note that
changing something in this screen will af f ect all active modules, not just the HIT module.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
Page 348