1.8.3
Finishing the test protocol
Press OK in the lower right-hand corner of the AC440 setup screen to save the customized test protocol.
The test protocol can then be f ound in the Protocols and sessions dropdown list in the f ront screen.
1.8.4
Changing a test protocol permanently
You can at any time make changes to an individual test protocol by entering the AC440 setup again as when
creating the test.
1
1)
Under Settings f ind the test protocol using the Name dropdown list.
2)
Browse the setup options as if creating a test protocol (see section 1.7) and amend as desired.
When f inished click OK (or Apply) to save the changes.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
3
Page 114