Launching Ac440; Launching From Otoaccess; Launching From Noah - Interacoustics Affinity 2.0 Additional Information

1.2

Launching AC440

Ensure that the Af f inity
suite. If the hardware is not detected, the Af f inity Suite will open but it will run in Simulation mode. This is
identif iable by the below icon in the lef t of the screen. If the unit is connected then the second icon below will
show, indicating a unit is present which it is connected to.
1.2.1 Launching from OtoAccess®
For f urther instructions about working with OtoAccess®, please see the OtoAccess® operation manual.
1.2.2

Launching from Noah

If you are using HIMSA's Noah 4, the Af f inity software will install itself automatically in the menu bar on the
start page, along with all the other sof tware modules.
For f urther instructions about working with Noah please see the Noah operation manual.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
2.0 /Equinox 2.0 is powered on and connected to your PC bef ore opening the sof tware
Page 2