The Speech Screen Elements - Interacoustics Affinity 2.0 Additional Information

1.3 The speech screen elements

The f ollowing section describes the elements of the speech screen in addition to the tone screen:
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
Input levels sliders allow f or adjusting the input level to 0 VU f or the
selected input. This ensures that correct calibration is obtained f or Mic1,
Mic2, CD1, and CD2.On the VU Meter the dial intensity is achieved when
the signal is at the 0 mark.
WR1, WR2 and WR3 (Word Recognition) allows selecting dif f erent speech
list setups as def ined by the selected protocol. The labels of these lists
which go along with these buttons can also be customized in the protocol
setup. (See section 1.7.2.3).
Binaural and Aided f unction allows f or indicating if the test is perf ormed
binaurally or while the patient is wearing hearing aids.
Page 9