Changing A Test Protocol Temporarily - Interacoustics Affinity 2.0 Additional Information

3.8.7

Changing a test protocol temporarily

You may f rom time to time run into a client with special needs requiring advanced or dif f erent testing
parameters. In this situation the Temporary Setup can be helpf ul. The setup changes made here will be
specif ic to the session. The test protocol name will be supplemented with an asterisk (*) to indicate that
changes have been made to original test protocol. After saving, the protocol will change back to the def ault
selected protocol making you ready f or your next client.
1) Enter the Temporary Setup by clicking the button in the f ront screen
Menu/Setup/Temporary setup).
3.8.7.1 Importing and exporting test protocols
The HIT440 also allows you to import and export test protocols to other HIT440 users.
3.8.7.2 Importing a test protocol
1) Go to HIT440 Setup (Menu/Setup/HIT440 setup)
2) Click Import and browse to the location on the PC or USB where the test protocol f ile has been saved.
3) Click Open.
4) The test protocol will then appear under Selected Protocol.
5) Af ter saving it by clicking OK the test protocol can be selected in the List of Protocols on the f ront
screen.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
(or alternatively select
4
2
Page 343