3.6.4
Running pre-programmed test protocols
1) Place the hearing aid in the test box (as described in section 0)
2) Select the appropriate ear
3) Select a test protocol
Select START to run the test automatically
The Auto Run f unction will ensure that all test in the protocol is perf ormed automatically. The tests included
automatic test f low will be marked with a
3.6.5
Automatic testing (auto run)
Auto Run ensures that the tests in the test protocol are run as an automatic test f low meaning that all tests
are perf ormed when pressing START. Tests included in the Auto Run is marked with a
ONLY the tests marked with a
need to be activated manually. This is done by clicking on the relevant test, then right clicking and select Run
this test.
D-0004576-Q – 2022/05
Affinity/Equinox2.0 – Additional Information
.
Auto Run check marks
will be perf ormed when pressing START. To run the remaining tests these,
in the test screen.
Page 287